What Zodiac does Mercury rule?

Questions And Best Answers - Mercury, Messenger of the gods, in Astrology/Zodiac

What Zodiac does Mercury rule?

Virgo: Ruled By Mercury

Mercury has a lot of different jobs in astrology, which is likely why it's one of the planets that rules over two zodiac signs. While Mercury's communication-focused side comes through in Gemini, its analytical inner-thinker comes forward in Virgo.
.

Welcome one more time to the mystical side of the Beast Zone. Where we look into the cosmos to pamper us with its zodiac knowledge. We see you have some questions about some of your relationships, dear Beast-Viewer, and today it will be your connection with the stars.

Who can you really trust? Who should you stay away from and the other zodiac signs who, as hard as you try, will never be your true friends. Keep watching and we'll find out. Before the cosmos gives our answer you want, make sure you hit subscribe and hit the notification button so you don't miss any new articles, also don't forget to support our channel by watching this article until the end.

ARIES // FIRE You're number one in the zodiac for a reason Aries. You love being a leader and always keep an eye out for number 1. As a fire sign, you are a passionate person who is very creative and confident.

However, you can be a little impatient and moody when you're with a Taurus who is known to be well grounded and practices cal. Taurus are known to often end a relationship when it's unhealthy , and will be uncompromising in their decisions. For you, Cancerians can also be a difficult friendship.

Taurus // EARTH Taurus, you love to be surrounded by beauty and good friends. You know what you want and stick with it. You are a realist and have the wonderful quality of being a very loyal friend.

But when it comes to your friendships, the volatile twin will likely be someone you want to avoid. Taurus likes to be in control, and the zodiac sign Gemini has been known to change his mind regularly. And dear Taurus, as we mentioned earlier, you probably won't have the best time with an Aries sign either.

GEMINI // AIR Gemini, you are a curious person! You are quick-witted and extremely social and communicative. You are known for being always ready for fun, but you can also get restless in your surroundings pretty quickly. Ironically, it will be difficult for you Zeitge Virgo leaves nothing to chance and is often very shy.

The conservative nature of the Virgo does not match the outgoing personality of the Gemini and will likely elude any situation in which a Gemini would thrive. Both of these zodiac signs have difficulty expressing themselves, so anytime there is a conflict or a fight, neither of the two zodiac signs is likely to take the first step towards reconciliation. CANCER // WATER Cancer You are one of the most emotional and sensitive signs of the zodiac.

You are very much in tune with your inner self and are a naturally good friend. Always ready to have an ear and be the shoulder someone has to cry on. But because you're extremely loyal, you won't like those below you too much.

Sagittarius are known to say anything they have to to get what they want. Sagittarius is a fire sign and that will conflict directly with you, Cancer, as you will be ruled by the elements t water. Cancer loves to surround herself with a happy home filled with those who love her, in which Sagittarius will always find the need LEO // FIRE Lions are known to be the leaders of the pack; they are dynamic and often achieve their goals with serenity and confidence.

Leos have been known to be a little self-centered, however (who would blame you, you're awesome)! When it comes to making long-term friendships, Leos can sometimes struggle to get involved because of their pride. I will be careful when you interact with those under the Pisces zodiac sign. Pisces are ruled by the element of water and you Leo are ruled by fire.

Water and fire just don't mix, and your personality differences will grow the better of you. Pisces are a more passive and sensitive type of sign and your audacity is likely to get on their nerves. VIRGIN // EARTH Virgo, you could be the hardest working zodiac sign in the zodiac, and that's a wonderful quality! But sometimes it can Do better Just give yourself some time for play and personal relationships! You are often misunderstood Virgo because you find it difficult to express yourself, but once you make a friend you are extremely kind and loyal.

You are also highly intelligent, dear Virgo, which could lead to a sanity argument with Aquarius friendships who also tend to be highly intelligent. It's not really your fault Virgo, Aquarius people crave time and can be temperamental at times // AIR Ah, Libra. Diplomatic.

It looks like you can get along with everyone! But that's not always that Fall. Libra, you are known as one of the most cooperative and fairest signs in the zodiac, but you are not a fan of the dramatic. Keyword, the scorpion.

Scorpios are known to be very charismatic and often lead lives of excitement. Scorpios are also known to be a bit mysterious at times, and Libra will not tolerate any of this behavior. SCORPIO // WATER S corpio, you are fun and passionate! You know how to express your emotions and you can be a real friend.

You are often very creative and personable, but you like to be the center of attention and the life of the party. It just makes sense that you're likely to collide with a sign that is actually quite similar to you, Leo. They are both extremely strong-willed characters and unfortunately equally stubborn.

While these similarities can sometimes mean a real friendship, it's more common for the two to clash and argue. Sagittarius // FIRE You are so much fun Sagittarius. You love to explore nature and meet new people.

You yearn for freedom like no one else and you can't bear to be bound. As mentioned earlier, the zodiac sign that you may not always get along with are those under the zodiac sign Cancer. Cancer can sometimes be clingy in friendship, and also insecure, which Sagittarius cannot stand.

The slightest hint of bondage and you, Sagittarius, will be on the way again. CAPRICORN // EARTH Capricorn you are the voice of reason, you are responsible, disciplined and you have mastered the art of self-control. You are extremely independent and sometimes you find it harder to make friends.

You like to learn from experience, but you can sometimes come across as a little knowing what those who are under the sign of Libra will not tolerate. You're both extremely level-headed, but Libra is a lot more social and can get on your nerves and seem like a distraction, Capricorn. AQUARIUS // AIR Aquarius you're so original and you really fight the good fight.

Maybe not as drastic as the twin, you often have two sides. Both shy and calm, but also quite excited and energetic! You have the ability to see both sides of the coin and often and bring peace to any situation. However, Aquarius is a bit aloof and enjoys experiencing the here and now, which repels the responsible and disciplined Capricorn.

You may not always get along with Pisces either. Aquarius like you will find them too emotional, while they may find you a bit cold in return. FISH // WATER Pisces you are a creative and artistic sign! You are gentle and very in tune with your emotions.

You are known to be very kind and quite selfless. Both fantastic qualities when it comes to making friends. There isn't really a sign that you can't get along with, but the Gemini might be too much for you at times, a tendency to get uncomfortable for the larger-than-life Gemini and in return the Gemini will try to make you into someone you aren't are.

And now it seems that this is all the cosmos has for us today, dear beast viewer. We need time to rest, but please come back and ask the stars even more burning questions in the future. Did this article describe your relationships perfectly? Or do you have a friend who violates everything on this list? Which sign is your best friend? Let us know in the comments below!

What is mercury personality?

Mercury, the planet of communication, is behind any Twin's conversational style which is, in a word, nonstop. Gems are known for being a friendly, chatty bunch, often torn between their wishes to ask and answer as many questions as possible, completely personifying Mercury's symbolic messenger. .

welcome to another article on palmistryguys. Little fingers also known as mercuryfingers help find the person's personality. Long mercury finger gives the opportunity to communicate freely with others, which makes the person quite successful in love affairs and relationships.

This happens because Mercury people have the ability to mix humor with a normal conversation, which makes them more interesting which ultimately helps them get the job done much faster. They are also gifted with a good logical mind to help them find the right ones Making decisions at the right time. For this reason they can be found in business and other related areas of making money, where they can very well analyze the various situations and find the way out through negotiation.

In most hands, you will find that the base of the mercury finger is set low compared to other fingers. In this case, the bases of the Jupiter, Saturn and Apollo fingers will be precisely aligned in a more or less looking horizontal line and then there will be a sudden drop as shown. What does a sudden drop in the base of the mercury finger mean? it indicates that there might be some incidents in the person's childhood or early stages of the career that caused the person to share their feelings or emotions in an open manner.

The higher the decline, the higher the person's chances of keeping their feelings or emotions to themselves, which they consider their rather mysterious nature. Low-set mercury fingers often make the little finger look shorter than other fingers. To determine the true length of the little finger, place the base of your mercury finger and align it with the base of the Apollo finger of another hand as shown.

This gives an idea of ​​whether the mercury finger is long, average, or short. When the mercury finger crosses the first joint of the Apollo finger, which is marked by the red line, it is considered a long finger. When the mercury finger reaches the first joint of the Apollo finger, as indicated by the green line, the length is considered to be average.

And finally, if the mercury finger just above the second joint of the Apollo finger, as indicated by the yellow line, is considered short. Remember folks, when assessing the person's personality, a small drop in the base of the mercury finger is often neglected when the mercury finger exceeds the first joint of the Apollo finger indicates that the person is aggressive in order to get money as soon as possible earn so that she can have a very smooth life in the later part of her life. They are very passionate about the work they do and go into every single possible detail.

This kind of devotion helps them rise to a position of power in a short period of time. In this case, the base of all the fingers is set evenly, which makes the person very open and honest. Take a look at the hands of the world's most successful people.

The richest man in the world, Bill Gates, billionaire Warren Buffett, legendary boxer Muhammad Ali and many other successful people, you will find that the length of the mercury finger is long and even. At the same time, it moves away from the Apollo finger as shown, which makes the person very charming. When the mercury finger just reaches the first joint of the Apollo finger or something below it, it indicates that the person is being very patient as they achieve success in their life.

You always strive for the balance between public and private life. They don't interfere in other people's lives and want the same consideration. Nor are they too power hungry, nor do they set their ambitions too low in their lives.

If the mercury finger is short as shown, the person will find it very difficult to communicate with others. Due to their socially awkward nature, they are often misunderstood in society, making it difficult for them to focus on a particular cause. They often need some kind of boost or motivation to move forward in life.

The reason for this is that they can't make life decisions easily. I haven't covered the curved pinky finger and shapes that will be seen in my subsequent articles. Folks, if you liked the article please hit the Subscribe button and turn on the notification bell so you don't miss my new uploads.

Don't forget to share with your family and friends. Thank you for watching

How do you make mercury strong?

Donate to please Mercury planet: Donate full Moong Dal, Green Vegetables and Green clothes on Wednesday. Man and woman can keep fast on Wednesdays, refraining taking any salt in fast this will miraculously strengthen weak mercury in horoscope of both male and females. .

Mercury is an interesting metal and element, but it rarely occurs in nature. The most common form found in nature is mercury sulfide, also known as cinnabar. Depending on the crystallization, mercury can come in two main forms, the alpha form being the most common.

It's a really strong red color so it's usually pretty easy to spot if it's in a rock like this one. It depends on the conditions, but it can sometimes also form these very beautiful crystals. Historically, red cinnabar was isolated, ground up, and used as a pigment called cinnabar.

The pigment was used in many things such as paints, cosmetics, and Chinese carved lacquerware. However, due to toxicity issues, it has been almost completely phased out and replaced with safer synthetic pigments. The black form also known as beta mercury sulfide or meta cinnabar.

It's a little rarer and it's not that pretty. When mercury sulfide is made chemically like I did in my other waste mercury article, it's usually in the beta form. However, if it is heated above 400 ° C and then allowed to cool, it usually turns to the red form.

The mercury metal can be extracted from the sulfide in two ways: thermally and chemically. When heated in the presence of oxygen, mercury sulfide breaks down into metallic mercury and sulfur dioxide. The heating process is usually incredibly hot and above the boiling point of mercury, so the metallic mercury boils off and needs to be condensed and recovered again.

However, it still contains many other metallic impurities, so it often needs to be re-distilled and purified. chemical? The heating process is often done with metals like iron or zinc or other compounds that can help pull the sulfur out of the mercury. The main disadvantage of this method is that it creates mercury vapor, which can be quite dangerous to chemically reduce the mercury sulfide back to metal.

The typical way to do this was to dissolve the mercury sulfide in a solution of sodium sulfide and then add aluminum. As the mercury metal is formed it will sink and collect at the bottom. The chemical method is safer because it does not produce mercury vapors.

However, this inevitably produces a lot of mercury-contaminated waste that has to be disposed of. For safety and process reasons, I have chosen the chemical method I use, which is slightly different from the typical one. This method was developed by plant1999 on the ScienceMadness forums and designed to be more accessible to the amateur, instead of using sodium sulfide we make a polysulfide solution with sodium hydroxide and sulfur which is usually much easier to get hold of, all waste here are heavily contaminated with celite, silica gel, and paper, and I'm not sure how much mercury actually is, it's also still slightly wet, but in any case the total mass is around 210g.

The stuff in the smaller bottle is much drier and has a total mass of about 59 g, so in total I have 269 g of waste and I just assume that it is 100 percent mercury sulfide. This allows me to recycle all of the mercury that I have, but it also means that I'll be doing it on a much larger scale than I probably need. Okay, so now I need to make a polysulfide solution.

The first step is to make a strong sodium caustic soda solution by mixing 400 g of caustic soda in 1,100 milliliters of distilled water. I turn on very vigorous stirring and then pour in all of the caustic soda. It should be noted that the dissolving of sodium hydroxide in water is very exothermic.

So it will heat up a lot. If it all dissolves, the solution may still be a little cloudy, but that's fine as long as there are no solids present. Now it's time to make the polysulfide solution so I'll start adding the sulfur.

The sulfur reacts with excess sodium hydroxide to produce mainly sodium sulfide, but some polysulfides are also formed. The polysulfides have the general formula Na2Sx, where they can have 2 to 5 sulfur atoms (sulfur is an atom, not a group, NileRed) But because I have such a large excess of sodium hydroxide, I imagine the polysulfides that form which are shorter ones with at most about 2 or 3 sulfur. This reaction requires things to be hot, so in some cases it needs to be heated.

In my case, however, the heat generated by dissolving the sodium hydroxide was more than enough. The reaction isn't very quick and it took about an hour for all of the sulfur to completely dissolve, wait for it to cool before moving on. In general, sodium sulfide solutions are completely colorless, so this dark red color comes from the polysulfides.

Eventually it just felt warm or slightly hot so I took it off the hot plate and transferred it to another container I could have done things right in the big bottle, but in the end it would have been very tedious to clean everything. In the polysulfide solution, you may notice some black flakes floating around, but that isn't going to affect the ion reaction in any way, and there is no point filtering it off. The stirring is turned back on and then I start pouring in the mercury sulfide.

At first I tried just pouring it in directly, but it resulted in a lot of splash so I had to transfer it to a piece of paper in small portions and then carefully pour it in. As more is added the solution slowly loses its red color and turns orange, and we also see some sulfur precipitating out. At some point I added all of my mercury sulfide from both waste bins.

At this point there's a fair amount of mercury sulfide that still hasn't dissolved so I keep stirring for about 30 minutes. When I get back there will be a little bit left, but it's not nearly as much as it was before. There are a lot of solids floating around in the liquid, most of which are just silica gel and celite.

However, it's not a huge problem and won't really interfere with the response. At this point I think we're ready so I'll dip into some tin foil. I decided to start slowly just to get an idea of ​​how violent the reaction is.

The film turns black very quickly and we see some bubbles. If we look closely we can see small pieces and flakes slowly falling off. The process is actually pretty slow, but the part that comes in contact with the solution will eventually break down completely.

Okay, now that I know the reaction isn't too crazy, I can pour in a little more aluminum. When I did this it seemed pretty tame at first, but eventually it started to take off. My fear was that if I add too much, things might gush out of the container, but with aluminum foil it doesn't seem like a huge problem.

Some impatient people have tried aluminum powder instead, and this definitely leads to a bladder problem. After a reaction of about 10 or 20 minutes, most of the aluminum disappears. From that point on, it's basically just a cycle of the same thing over and over again.

We add aluminum foil, stir every now and then and wait until everything is gone, then recharge it with more aluminum. Okay, so let's just talk about what's going on here. When the mercury sulfide is added, it reacts with the sodium sulfide to form a water soluble complex.

In the presence of sodium hydroxide and aluminum, the mercury in this complex is reduced back to mercury metal. The sodium sulfide is both regenerated and produced in this reaction, and we also make sodium aluminate and water. Here, a large excess of sodium hydroxide is usually used to prevent the hydrolysis of sodium sulfide and the other polysulfides.

If the concentration of sodium hydroxide becomes too low, the sodium sulfide is converted into sodium bisulfite and the mercury sulfide is no longer soluble. The one we need is hard to calculate as it tends to react with other metals that may be present, such as arsenic or antimony. It's not really a problem to me as all I should really have here is mercury sulfide, but it's a problem when people are trying to clean natural cinnabar, at some point some crazy spider decided to investigate the reaction.

He went down slowly and landed on a piece of the aluminum, but then quickly jumped off. At first I thought he was a maniac and maybe a monster because I didn't try to save him, but he escaped. Unfortunately, in his desperate scramble to get out, his net tore and he fell back in.

As I keep adding more aluminum the reaction slows down a lot and it turns black. Aluminum foil is only 98 or 99% pure, and most of that black junk is likely due only to contamination. If I lift the container and look at the bottom, we can see a number of small lumps of mercury.

At this point I think I'm more or less done, but just to be sure I added five more rounds of aluminum. With red vermilion we have a visual cue because when we're done we shouldn't be able to see any more vermilion. However, with the black stuff, it kind of mixes in with the goo that formed during the reaction, and the end point is really hard to say.

To make sure I was done I just used a large excess of aluminum, probably three or four times the amount I needed thinking I was done, I added the same amount of distilled water. In the end, the stuff I have is pretty sticky, and that serves to dissolve it up a bit. I stirred a little, and the goal is to make sure all of the mercury metal sinks to the bottom.

While I let it sit there, the solid stuff should slowly separate. I let the whole thing stand overnight, and in the morning I had a relatively good breakup. So now I'm trying to just pour off the liquid part.

The water here is pretty stinky because it is still full of polysulphides, and it is also very alkaline because of all the caustic soda. This is initially wrapped in cling film and put on its side. I will come back to this later in the article, in a separate container I start pouring off the muddier stuff, mercury metal is really dense and unlike that black contaminant it doesn't get suspended in water so the idea here is to keep adding water and swirling it around to suspend the black garbage and then pour it off, which should leave the mercury behind.

It's very important to be careful here because if I mess something up and pour out some of the mercury I'll have to restart, this process is not exactly the most efficient and will use a fair amount of water, and unfortunately it means that that I produce a decent amount of waste, but later in the article I'll go to show you guys exactly how I handled it. Anyway, at some point most of the trash was washed out, so I put the mercury in a mug. It was still pretty dirty though, so I used a little more water to clean it up.

When I finished, I was left with a beautiful and shiny mercury metal. The quality of the mercury at this point really depends on the source of the mercury sulfide. Even though my mercury sulfide was waste material, it's still much purer than naturally occurring cinnabar.

Some of the other metals in cinnabar can fuse with the mercury and take it away from it luster, or make it kind of chunky. In any case, no matter how clean the mercury looks, it is likely still heavily contaminated with other metals. To clean it we have to do two washes, first with some potassium permanganate and then with nitric acid to let the mercury sit for about a week or so and when I got back it was all cloudy.

The dirty water was transferred to another beaker and the mercury was washed with a little distilled water. The mercury is no longer shiny either, and there is a bit of scum on top. Okay, now to clean up, and to that I'm adding some dilute potassium permanganate solution.

Potassium permanganate is a powerful oxidizer that reacts with many metals, but in these dilute conditions it should be the mercury not really touch. Many of the metals react to form their corresponding oxides that can no longer combine with mercury - they separate as a solid and I have this lumpy mixture. I spin them around to give them a good wash and then I let it sit for about five or ten minutes.

I drain as much as possible without losing the mercury. It is washed several times with distilled water until the purple color disappears. When I finished, I had a really dirty mix.

Fortunately, it's very easy to clean with a small amount of 10% nitric acid. The nitric acid reacts with metals and metal oxide impurities, making them water-soluble. After just 30 seconds, the mercury is already quite shiny.

I let it sit for a few more minutes, and the Solution became completely colorless. I now have nice and clean and relatively pure mercury and it's time to drain the nitric acid. Instead of mixing it with the potassium permanganate, I poured it into its own separate beaker then washed it a few times with some distilled water.

All of the potassium permanganate and nitric acid waste is heavily contaminated with mercury, and I'll have to deal with it later. However, with a syringe I sucked it all out Mercury and transferred it to a small filter paper. I drew up some water with the last bit of water, but it doesn't matter - I just tip the syringe back and squeeze the water out.

Any remaining water droplets should be sucked up on the filter paper. Once everything is loaded, I use a needle and poke a hole at the bottom. The mercury can push its way through the small pinhole, but solid debris should be trapped and left behind, cap the bottle and I'm as good as done.

The final mercury recovery is 26 grams or 1.9 ml, which is about thirty point two grams of pure mercury sulfide. If you consider that I started with 2 ounces of waste, it means most of what I just had silica gel and celite.

This actually makes sense because the reactions I used the mercury in were all pretty efficient so I wouldn't expect there to be too much in the trash. If all of my mercury sulfide had been anyhow pure, I would have gotten about 230 grams of mercury metal, or 17.2 milliliters, which is almost ten times more.

In terms of use, the mercury can either be kept here as a souvenir or used in chemical synthesis. If kept as a souvenir, it must be stored properly to avoid spillage or leakage. I've used mercury metal a couple of times in previous articles, and the most famous is probably Pharaoh's Serpent I provided a number of links in the description.

Anyway, now is the time to clean up all of the trash I've made. I decided to do the cleaning up in a separate article, for which you either click on the link on the screen or in the description. To promote this channel a bit, I've decided to try something new and will be giving a giveaway of some NileRed mugs and key chains.

It will be a random draw and the winner will ev. Everything will be delivered completely free of charge. If you want to participate, just click on the link in the description and all you have to do is subscribe to me on YouTube or follow me on Twitter.

The competition ends on Thursday and the winner will be announced in my next article on Saturday.

What does the R in birth chart mean?

If you see an 'R' next to a planet in your birth chart that means it was in retrograde when you were born. Someone with Mercury retrograde in the birth chart may have a reflective or introverted mind. .

Wouldn't it be great if you could look at any natal chart (yours or someone else's) and quickly see what the most important components of personality and general life experiences are? That's how it's done. First, you need a natal chart. Let's use yours as an example, if you don't have it you can use my simple and easy-to-use natal chart calculator here.

Keep in mind that this calculator uses the actual size and location of the constellations known as sidereal astrology. Be aware that some of your signs are different, for more information on zodiac signs, check out this short article that explains it in detail Now let's start. There are three main components to any astrological chart: the houses, the signs, and the planets.

The houses represent the heavens at the time of your birth. More precisely, the ecliptic, that is the way the planets move in the sky. The houses form the skeleton of the horoscope and are always in the same place for everyone.

If you use today, the far left part of the chart represents the eastern horizon, also known as the ascending or ascendant. This is the beginning of the diagram, and the houses start here. Start with the 1st house moving counterclockwise to the 12th. (Note that astrologers use different house systems.

So the ascendant could be somewhere in the 1st house, or you may notice the houses are in The system we use today and what my calculator uses is called the same house system that divides the ecliptic into 12 equal segments starting from the ascendant. You can use any system you prefer.) Directly opposite the ascendant is the descendant who, as you can imagine, is the western horizon or attitude.

The upper part of the diagram represents the highest part of the ecliptic in the sky, and the lower part, what is below the horizon or the invisible sky. What do these houses mean in the diagram? Because the houses represent the areas of heaven: In astrology the houses represent the areas of life. Starting with the first house, which represents all areas of our life that have to do with ourselves such as self-image, motivations, our goals, our physical body, our appearance etc.

The second has to do with our values ​​etc. The houses represent what we could call “areas of life”. The next component of the natal chart are the signs - the ecliptic were the signs of the zodiac at the time of your birth.

Which sign rose, which set? This is where individual interpretations can begin, as we now have two components of the diagram to compare the properties of heaven show at the time of your birth. An easy way to remember what they represent is to look at them as features of life. From the directness of Aries to the receptivity of Pisces, the zodiac signs show the qualities that come through our life component t, the planets, represent the experiences in our life.

These ephemeral bodies in heaven reflect our ephemeral experiences here on earth. As always, these experiences shape our personality. In which house a planet is located shows us in which area these life experiences occur; whatsign what characteristics these experiences consist of.

With regard to our personality, the houses show which areas of life are important areas for us; the signs which features stand out in our personality. It is easiest to think of planets as the experiences of life that shape our personalities. Now let's see what your horoscope says about you.

In the general analysis of the natal chart, let us begin with the most basic elements first. In other words, the most basic elements of your personality and your overall life experiences. There are four main components of the chart that show this.

Your sun, moon, ascendant, and the ascendant ruler, also known as your chart ruler. Essentially, we're looking for the house and sign positions of these four components (with the exception of the ascendant, which only shows the sign, but we'll get to that later. Let's start with your sun and moon.

These two elements represent the most basic and essential, yin) and yang, elements of yourself The sun represents your outward-looking, expressive and masculine side. While the moon represents your inward-looking, reflective, feminine side. Together, these planets form the majority of your inner and outer personality.

Along with the types of persistent experiences that affect the sun and moon in your horoscope. They are represented here by these symbols. Once you have identified both the house and sign position of your sun and the house and sign position of your moon, use these PDFs to find out what these basic elements of your inner and outer self are Remember that the house placements show the areas of life that are important to you and important issues in your life.

The sign shows the traits that result from your personality and your life experiences. Your sun represents your outer self and the moon represents your inner self. Now let's look at your Ascendant and Chart rulers.

These elements essentially represent how your life unfolds and what shapes your personality over time. You are like your sun and moon, with the exception of life path and life events which further shape your personality. You can think of this for what you will become and which strongly represents you and your life in the horoscope.

Your ascendant represents the qualities that you develop as a result of your life experiences. There is only one sign associated with it because it is always associated with the 1st house. Your map ruler, on the other hand, is essentially the planet that rules the sign of your Ascendantis.

The house and sign position the chart ruler shows a more detailed look, not just at the traits you are developing, but also at the area of ​​life. First, let's identify your rising sign. Look up the properties of this character using the same PDF we used earlier.

Remember, these are the qualities that emerge through your overall life experiences and make you who you will become. These are very important qualities that you should develop in your life. Now let's identify your chart ruler.

Q First, you need to know which planet is ruling your ascendant's sign. Use this PDF here to get a list of rulers for each of the zodiac signs. You may find that you have two, in which case you mark both planets as they are going to be equally important.

Once you have identified your chart ruler, find its house and character placement, just like you did with the Sun and Moon. Use the same PDFs we used before to identify which areas of life and traits shape your personality over time Chart Ruler essentially represents you in the horoscope and what is being developed. At this point in your analysis you have uncovered the four most basic elements of the natal chart.

The analysis and understanding of these four components alone will add to a great understanding of yourself and your outstanding life experiences. You can apply the same process to any person's diagram. For those of you who wish to take the analysis further, make sure to keep the key associations down look at the form between these four components and other planets in the natal chart.

These are called aspects. The aspects can either be found on the inside of the horoscope next to the horoscope or both. Here is a PDF with the various aspects for your further analysis.

Next, you can look at the inner planets Mercury, Venus and Mars. Then the middle planets: Jupiter and Saturn. Followed by the outer planets Uranus and Neptune.

And the comets: Chiron and Pluto. Analysis of their house and character placements. Note that the personality traits become deeper and less obvious as you move further to the more distant planets.

Similar to an onion where the outer layer of our personality and experience is the four main components that we covered in this article. Followed by the inner planets, the center, then the outer ones in the center of the onion. (As a side note, pay special attention to planets in the 1st house as they tend to come through strongly in personality and experience.) Here is a list of the major planets it shows which elements of self and experience are in life they represent.

With continued practice, mainly focusing on the four main components of the natal chart described in this article, you will be able to interpret a natal chart quickly, in a matter of minutes.

Which house is good for Mercury?

Mercury is considered auspicious in the 1, 2, 4, 5, 6 and the 7th houses and gives bad results when placed in the 3, 8, 9, 10, 11 and 12th. Its colour is green and moon is its enemy. Sun Venus and Rahu are friends, whereas mars, Saturn, and Ketu are neutral to him. 7th house is the Pukka ghar of mercury. .

What animal represents Mercury?

Mercury represents animals like dog, goat, ape, weasel, fox, parrot and reptiles. .

What happens if Budh is strong?

A strong Mercury makes a person a good strategist. Such a person is usually well behaved. Mercury is the Lord of Gemini and Virgo signs. Mercury is in its Mooltrikona sign when it is in Virgo from 15 to 20 degrees.

What does backwards R mean in astrology?

If a backwards 'R' appears next to a planet, it means that planet was in retrograde at the time of your birth. (23 2015 .

What sign is Tinkerbell?

Tinker Bell - Cancer - Emotional, Moody, Imaginative. .

Which house is not good for Mercury?

Mercury is considered auspicious in the 1, 2, 4, 5, 6 and the 7th houses and gives bad results when placed in the 3, 8, 9, 10, 11 and 12th. Its colour is green and moon is its enemy. Sun Venus and Rahu are friends, whereas mars, Saturn, and Ketu are neutral to him. .